Lexmark MS610dn Manual page 96

Printer specifications
Standard trays and special media trays
The Lexmark T630, T632, and T634 paper feeding mechanism uses advanced technology that enhances feeding
reliability. The standard Lexmark T630, T632, and T634 tray, which holds 250 or 500 sheets of bond paper, reliably feeds
all media tested according to the guidelines specified under
For those difficult‑to‑print sizes, such as 3 x 5‑inch index cards, Lexmark offers a variety of special media trays and
drawers.
Note: Optional 250‑sheet Universally Adjustable Trays can be used to print forms with a minimum length of 5 inches
using a T630 when installed either in the integral tray location or in a 250‑sheet drawer under a 250‑sheet integral
tray. Optional 250‑sheet Universally Adjustable Trays support forms with a minimum length of 7 inches on a T632.
Optional 400‑sheet Universally Adjustable Trays support forms with a minimum length of 7 inches on the T630, T632
and T634.
Source
250‑Sheet Special Media Tray
250‑Sheet Special Media Drawer
250‑Sheet Universally Adjustable Tray
250‑Sheet Universally Adjustable Drawer
500‑Sheet Special Media Tray
500‑Sheet Special Media Tray + Drawer
400‑Sheet Universally Adjustable Tray
400‑Sheet Universally Adjustable Tray + Drawer
Card stock and label guidelines
Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used for label
applications to optimize feed reliability. See your printer documentation for information on ordering label fuser
cleaners.
Printing labels on the T630, T632 and T634 requires a special label fuser cleaner that prevents duplexing.
It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 56P1415. When you order
a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner.
It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult
the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must
install a special fuser wiper. The wax wiper that is used with the T630, T632, and T634 is P/N 56P2109. (Cartridges
designed for duplex label printing contain two wax wipers. Change the wax wiper at the halfway point of your normal
cartridge usage to provide additional cleaning and optimize performance.)
When printing on labels:
•
Using the printer operator panel, set the Paper Type to Labels in the Paper Menu. For vinyl and other heavy labels,
set the Labels Weight (under the Paper Weight menu) to Heavy, and set the Labels Texture (under the Paper Texture
menu) to Smooth.
Note: When Paper Type is set to Labels, and Labels Weight is set to Heavy, the printer reduces the printing
speed to 30 ppm, to ensure acceptable printing.
•
Do not load labels together with paper or transparencies in the same paper tray. Combining print materials can
cause feeding problems.
"Dimensions" on page 9.
96
Part number
11K1572
11K1573
11K1574
11K1878
11K1921
11K1922
11K1941
11K1942