Printer specifications
Lexmark MS710 and MS711
The Lexmark MS710 and MS711 printer models print on many labels, which includes vinyl and polyester, designed for
use with laser printers.
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Paper source
Index Bristol
Standard and
199 g/m
optional 250‑ and
550‑sheet trays
Multipurpose
199 g/m
2
feeder
1
See
"Grain orientation" on page 17
2
Due to label design characteristics, unacceptable feeding may be experienced from the multipurpose feeder.
Labels
Thickness:
Smoothness:
*150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock
Weight:
Card stock and label guidelines
Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used for label
applications to optimize feed reliability.
Printing labels on the Lexmark MS710 and MS711 requires a special label fuser cleaner that prevents duplexing.
It is recommended that when you run labels, you install a special oil fuser cleaner, P/N 40X8579. When you order a
new cartridge, make sure the cartridge includes the correct fuser cleaner.
1
Card stock
Tag
Cover
2
2
203 g/m
176 g/m
2
2
203 g/m
176 g/m
for specific recommendations.
0.102–0.305 mm (0.004–0.012 in.)
100–400* Sheffield
Up to 199 g/m
Up to 203 g/m
Up to 176 g/m
Dual‑web
Paper
paper
2
2
180 g/m
180 g/m
2
2
180 g/m
180 g/m
2
Index Bristol (110 lb)
2
Tag (125 lb)
2
Cover (65 lb)
Labels
Polyester
Vinyl
2
2
220 g/m
300 g/m
2
2
220 g/m
260 g/m
76
2
2