Lexmark C760 And C762 - Lexmark MS610dn Manual

Printer specifications
When printing on labels:
• Using the printer operator panel, set the Paper Type to Labels in the Paper Menu. For vinyl and other heavy labels,
set the Labels Weight (under the Paper Weight menu) to Heavy, and set the Labels Texture (under the Paper Texture
menu) to Smooth.
•
Do not load labels together with paper or transparencies in the same paper tray. Combining print materials can
cause feeding problems.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive
material may contaminate your printer. It could also void your printer and cartridge warranties.
When feeding labels, the number of labels per sheet can affect registration more than basis weight. Typically, the more
labels per sheet, the better the registration.
When printing on card stock:
•
Set the Paper Type to Card Stock in the Paper Menu.
•
Do not use card stock that is creased. It may cause paper jams.
For more information, see the following:
•
"Pick roller technology" on page 11
•
"Grain orientation" on page 17
•
"Maintenance procedures" on page 14
•
"Troubleshooting" on page 14

Lexmark C760 and C762

Lexmark C760 and C762 print on many labels designed for use with laser printers.
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Note: The optional 2,000‑sheet drawer supports paper only.
49