Lexmark MS610dn Manual page 61

Printer specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality
degradation.
Card stock Width:
Length:
Weight:
Card stock and label guidelines
When printing on labels:
• Load labels only on the multipurpose feeder.
•
From the printer control panel, set Paper Type to Labels in the Paper Menu.
•
Do not use label sheets with a slick backing material.
•
Do not print within 1 mm (0.04 in.) of the die‑cut, the edge of the label or the perforations, or between the die‑cuts.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam.
•
Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your
warranty.
When printing on card stock:
• From the printer control panel, set Paper Type to Card Stock.
• Do not use creased card stock. It may cause paper jams.
•
We recommend the use of grain long card stock.
210–216 mm (8.3–8.5 in.)
279–356 mm (11–11.7 in.)
2
120–128 g/m
0.13–0.20 mm (0.005–0.008 in.)
100–400 Sheffield*
210–216 mm (8.3–8.5 in.)
279–356 mm (11–11.7 in.)
2
Up to 220 g/m
61