Table of Contents
Advertisement
Lexmark T430: Overview of card stock support
Paper source
Tray 1
Multipurpose Feeder*
* Card stock can only be fed from the multipurpose feeder and must always exit to the rear output bin.
Lexmark T430: Overview of label support
Label type
Paper
Integrated
Dual web
Warning:
Do not place over 100 label sheets in the standard tray or over 30 label sheets in the multipurpose feeder.
Feeding labels from print media sources that are not supported may damage your printer.
Media specifications
Labels
Width:
Length:
Weight:
Thickness:
Smoothness:
* 150 - 250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock
Weight:
Note: Always use the rear exit when printing on card stock. To minimize curl, use the rear exit when printing on labels.
Lexmark T430
Lexmark T430
The Lexmark T430 prints on paper office labels designed for laser printers.
Limit label printing to occasional use. We do not recommend using vinyl or
polyester labels.
The Lexmark T430 supports stocks from 60 to 163 g/m2 (16-43 lb). The
multipurpose feeder can feed up to 30 sheets of dual-web or integrated labels
and 10 sheets of card stock.
The following table lists the maximum basis weights supported by Tray 1 and
the multipurpose feeder.
Index Bristol
–
60 to 163 g/m
Standard tray
X
X
X
- indicates support
X - indicates no support
76.2 to 216 mm (3.0 to 8.5 in.)
127 to 355.6 mm (5 to 14 in.)
Up to 199 g/m
Up to 0.25 mm (0.01 in.)
100 to 400* Sheffield
Up to 163 g/m
Up to 163 g/m
86
Tag
–
2
(16—43 lb)
Multipurpose feeder
2
(53 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
Cover
–
–
Optional trays
X
X
X
Advertisement
Table of Contents
