Using The Master Power Key; Programming The Master Power Key - Universal Electronics OCAP 5 User Manual

USING THE MASTER POWER KEY

The Atlas OCAP 5-Device Remote Control with Learning
has a unique feature that allows you to sequentially turn
up to five of your home entertainment devices on or off
with a single key press.
NOTE: MASTER POWER (PWR) only works in the CBL
mode. If it is not programmed, only the cable
converter will turn on or off. In any other
mode, pressing MASTER POWER (PWR) once
will turn the selected device on or off.

Programming the Master Power Key

On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
2. Enter 9 9 5. The last-selected device key
blinks twice.
Press PWR once.
3.
4. For the first device you want in the power on
sequence, press a device key (e.g., CBL) once.
Then press PWR once. For the second device
in the power sequence, press its key once (e.g,
TV). Then press PWR.
5. Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
6. To save the settings and exit the program:
a. Press CBL once.
b. Press and hold SETUP until the CBL key blinks
twice.
www.urcsupport.com/atlasocap
22