Using The Master Power Key; To Program The Master Power Key; To Operate The Master Power Key; To Clear The Master Power Key - Universal Electronics ATLAS DVR 5, PVR 5 User Manual

Atlas DVR/PVR Manual

USING THE MASTER POWER KEY

The Atlas DVR/PVR 5-Device Universal Remote Control
has a unique feature that allows you to sequentially turn
on or off up to five of your home entertainment devices
with a single key press.

To Program The Master Power Key:

On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice,
then release SETUP.
Enter 9 - 9 - 5. The last-selected device key
2.
will blink twice. Then press PWR once.
3. For the first device you want in the power on
sequence, press a device key (e.g., CBL) once .
4. Repeat step 3 up to four more times to add the
second,third,fourth,and fifth device,as desired.
5. To save the settings and exit the program, press
and hold SETUP until the last-selected device
key blinks twice, then release SETUP.

To Operate The Master Power Key:

NOTE: If MASTER POWER is not programmed, pressing it will only
command the last-selected device to power on or off.
1. After programming, point the remote control
at the devices.
2. Press and hold PWR for at least 2 seconds.
You will see the devices power on or off
according to the programmed sequence.

To Clear The Master Power Key:

1. Perform steps 1 and 2 in the first section
above, To Program The Master Power Key.
2. To clear the settings and exit the program,
press and hold SETUP until the last-selected
device key blinks twice, then release SETUP.
3/20/03 5:00 PM Page 29
29