Installing Ceiling Hardware - Hunter 41532-01 Manual

Installing Ceiling Hardware

1. Drill two (2) 1/4" diameter holes 2-9/16" apart through the back of the outlet box into the cross
brace 2" deep. These holes are for the U-bracket bolts. Install rubber bushing and pin into the
u-bracket. Use a 3/8" wrench to install the (2) 3 1/2" lag bolts to secure the U-bracket to the joist
(see Fig. 2).
Exploded View
Cross
Brace
Rubber
Bushing
and Pin
U-Bracket
Lag Bolt
Fig. 2
Hunter Fan Company
! CAUTION
DO NOT USE LUBRICANT ON SCREWS
Ceiling
Outlet
Box
6
!
Installed View
3 1/2" Lag Bolt
41532-01 • 09/04/13