Table of Contents
Advertisement
1886
You probably bought this fan with a location in mind. Let's check below to make sure it is a good fit.
Check the room dimensions:
30 inches
from blade tip to
nearest wall or
obstruction
from bottom edge
of blade to the
You have two options for installation. Pick which one works best for your location. Remove any existing
bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan's box.
Do this first!
WARNING
To avoid possible electrical shock, before
OFF
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Option 1:
Machine Screws
Use machine screws
(provided with outlet box)
and washers when securing
to existing ceiling fan-rated
outlet box. Make sure it is
securely installed and is
acceptable for fan support of
31.8 kg (70 lbs) or less.
Hunter Pro Tip:
The machine screws are the ones
that came with your outlet box.
Loosen the two preinstalled canopy
screws so that they are still engaged.
Note:
Fan style may vary.
3
Ceiling Bracket
Choosing the Right Installation Location
7 feet
floor
Installing the Ceiling Bracket
Installing the Top Housing
Rest the trim ring on the top housing.
Hanging Fan
Check the outlet box:
Option 2:
Wood Screws
Use wood screws and
washers (included) when
securing to support structure
with approved electrical
outlet box. Drill 9/64" pilot
holes in support structure
to aid in securing ceiling
bracket with hardware found
in the
Wiring
Canopy
You must be able to
secure the fan to building
structure or fan-rated
outlet box.
bag
hardware bag.
Wood Screw
Feed the fan wires through the center hole
of the canopy, then wrap the keyhole slots
around the canopy screws and twist counter
clockwise.
Blades
x2
Washer
x2
Wall Control
Advertisement
Table of Contents
