Front Panel
The access point front hardware functions are described below.
Power
Figure 1. WN604 front panel
The following table explains the LED indicators on the front panel.
Table 1. Front panel LEDs
LED
Description
Power
• Solid green. Power is on and the access point is ready.
• Blinking green. A firmware update is in process.
• Solid amber. The access point is performing a power-on self-test.
• Off. No power.
Wi-Fii Protected
Setup (WPS)
• Blinking green. WPS activities are in process.
• Off. No WPS activity, or there is a WPS error.
Wi-Fi
• Solid blue. The wireless radio is up and running without wireless data
transmission.
• Blinking blue. Wireless data is being sent or received.
• Off. The wireless interface is turned off.
LAN ports 1–4
• Solid green. 100 Mbps link detected, no data transmission on the port.
• Blinking green. 100 Mbps link detected, data transmission on the port.
• Solid amber. 10 Mbps link detected, no data transmission on the port.
• Blinking amber. 10 Mbps link detected, data transmission on the port.
• Off. No link is detected
Wireless N150 Access Point WN604
WPS
Wi-Fi
LAN ports 1–4
Getting Started
8