WG602v4 Wireless Access Point Front Panel
The wireless access point provides three status LEDs.
Power
Figure 1-1
The following table explains the LED indicators.
Table 1-1. Front Panel LED Description
LED
Power
Off
On
Ethernet
Off
Green On
Green Blink
Amber On
Amber Blink
Wireless
Off
Green On
Green Blink
Introduction
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
Wireless
Ethernet
DESCRIPTION
Power Indicator
No power. If this LED does not come on with the power adapter and cord correctly
installed, see
Chapter 5,
Power is on.
Indicates no Ethernet link detected.
100 Mbps Fast Ethernet link detected, no activity.
Indicates data traffic on the 100Mbps Ethernet LAN.
10 Mbps Ethernet link detected, no activity.
Indicates data traffic on the 10Mbps Ethernet LAN.
Indicates no wireless link detected.
Wireless link enabled, no activity.
Wireless link activity.
v1.0, June 2007
"Troubleshooting."
1-5