Manually Configure Security; Configure Wpa2, Or Wpa2 + Wpa, Or Wpa - NETGEAR N150 WN604 User Manual

WEP and TKIP provide only legacy rates of operation. So, AES is
Note:
the recommended solution to use the 802.11n rates and speed.

Manually Configure Security

The following sections explain how to manually configure security.
If you use a wireless computer to change wireless security settings,
Note:
you will be disconnected when you click Apply. Reconfigure your
wireless adapter to match the new settings or access the access
point from a wired computer to make any further changes.

Configure WPA2, or WPA2 + WPA, or WPA

The process of setting up WPA2, WPA, or WPA2 + WPA is very similar. Consult the product
document for your wireless clients and for instructions on configuring client WPA2 settings.

To configure WPA2, or WPA2 + WPA, or WPA in the access point:
Select Configuration > Security. The Edit Security Profile screen displays:
1.
From the Network Authentication drop-down list, select the option that you want to use to
2.
secure your network. NETGEAR recommends WPA2, but you can select any of the
following, depending on whether your client devices support WPA2:
Wireless N150 Access Point WN604
Configure Security
28