Factory Default Settings - NETGEAR N150 WN604 User Manual

Factory Default Settings

The Reset button has two functions:
Reboot. When pressed and released quickly, the access point restarts.
•
Reset to Factory Defaults. This button can also be used to clear all data and restore all
•
settings to the factory default values.

To clear all data and restore the factory default values:
Power off the access point and power it back on.
1.
Use something with a small point, such as a pen, to press the Reset button in and hold it in
2.
for at least 5 seconds until the WiFi LED blinks rapidly.
Release the Reset button.
3.
Your device returns to the factory configuration settings shown in the following table.
•
Table 4. Access point default onfiguration settings
Feature
Login URL
User name (case-sensitive) printed on
product label
Password (case-sensitive) printed on
product label
Static IP address
Ethernet MAC address
Port speed
Subnet mask
DHCP client
Wireless N150 Access Point WN604
Default setting
www.routerlogin.net or www.routerlogin.com
admin
password
192.168.0.100
See bottom label.
10/100
255.255.255.0
Disabled
Supplemental Information
60