Table of Contents
Advertisement
Isys™ 2.8" Handheld WiFi Touchpanel
4 • Isys™ 2.8" Handheld WiFi Touchpanel: TPMC-3X
Applications
The following diagram illustrates a basic configuration that connects a TPMC-3X
WiFi touchpanel to a control system via a wireless access point (WAP).
TPMC-3X in a Simple Network
The distance between the TPMC-3X and the CEN-WAP-ABG-1G
(or CEN-WAP-ABG-CM) should not exceed 50 feet (~15 meters).
The diagram on the following page presents a more complex configuration. In this
scenario, the WAP is connected to a port on the control system's C2ENET-2 card.
The other port is connected to the corporate LAN. The card's internal firewall
controls data flow, thus isolating the two subnets.
NOTE: When using a dual-port Ethernet card, Ports A & B must be different
subnets (e.g., Port A = 128.x.x.x; Port B = 192.x.x.x).
For additional information on setting up and understanding an Ethernet network,
refer to the latest version of the Crestron e-Control Reference Guide (Doc. 6052).
Crestron TPMC-3X
Operations Guide – DOC. 6789F
Advertisement
Table of Contents
