Cloud Settings; Applications - Crestron TSW-570 Series Product Manual

Cloud Settings

Click Cloud Settings to enable or disable a connection between the touch screen and an XiO Cloud®
service account. A connection to the XiO Cloud service is enabled by default.
Settings Tab – Cloud Settings
Turn on the Cloud Configuration Service Connection to allow a connection between the touch
screen and an XiO Cloud account. This setting is turned on by default.
For more information on connecting to the XiO Cloud service, refer to Connect to XiO Cloud
Service (on page 76).

Applications

Click Applications to a select an application to run on the touch screen.
Settings Tab - Applications
Use the Application Mode drop-down menu to select a touch screen application from the available
selections. User Project is selected by default.
Once a new application is selected, click Save Changes from the Actions menu. A pop-up dialog box
is displayed stating that the touch screen must be rebooted for the new application to take effect.
Click Yes to reboot the touch screen now or Noto reboot the touch screen later. The touch screen
reboots with the new application running.
NOTE: Each application uses a unique setup procedure for registering and configuring the
application. For more information on supported applications, refer to Application Selection (on
page 74).
Product Manual — Doc. 8550C TSW-570, TSW-770, and TSW-1070 • 59