Applications; Control System - Crestron TS-770 Product Manual

Settings Tab – Cloud Settings
Turn on the Cloud Configuration Service Connection to allow a connection between the touch
screen and an XiO Cloud account. This setting is turned on by default.
For more information on connecting to the XiO Cloud service, refer to
Service (on page 76).

Applications

Click Applications to a select an application to run on the touch screen.
Settings Tab - Applications
Use the Application Mode drop-down menu to select a touch screen application from the
available selections. User Project is selected by default.
Once a new application is selected, click Save Changes from the Actions menu. A pop-up dialog
box is displayed stating that the touch screen must be rebooted for the new application to take
effect. Click Yes to reboot the touch screen now or Noto reboot the touch screen later. The touch
screen reboots with the new application running.
NOTE: Each application uses a unique setup procedure for registering and configuring the
application. For more information on supported applications, refer to
page 74).

Control System

Click Control System to configure a connection to a Crestron control system.
NOTE: The Control System accordion is shown in user project mode only.
Product Manual — Doc. 8555D
Connect to XiO Cloud
Application Selection (on
TS-770 and TS-1070 • 59