Selecting An Approach - Garmin GTN 625 Pilot's Manual

Touch To Select
Foreword
Or Remove
Arrival
Getting
Started
Touch To Edit
Waypoint
Xpdr Ctrl
Com/Nav
6.4
FPL Only one approach can be loaded at a time in a flight plan. If an approach
is loaded when another approach is already in the active flight plan, the new
Direct-To
approach replaces the previous approach. The route is defined by selection of an
approach, the transition waypoint, and a runway.
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
Touch To Select Airport
System
Messages
Symbols
Appendix
Index
6-8
Figure 6-14 Flight Plan With Arrival Loaded

Selecting an Approach

1. Touch the PROC key on the Home page. The Approach, Arrival,
and Departure fields will be dashed until a selection is made.
Figure 6-15 Procedures Selection Window
2. Touch the Approach key on the Procedures page to select
an approach for the destination airport. Confirm that the
intended airport is shown or touch the Airport key and select
the desired airport.
Figure 6-16 Selecting an Approach
Garmin GTN 625/635/650 Pilot's Guide
Scroll To View
Flight Plan
With Departure
Waypoints
Touch To Select Departure
Touch To Select Arrival
Touch To Select Approach
Touch To Select Approach
Touch To Select Channel ID
190-01004-03 Rev. F