Waypoint Location Based On Two Radials - Garmin GTN 625 Pilot's Manual

7.7.3
Foreword
Getting
Started
Touch to Select
Radial/Radial Waypoint
Xpdr Ctrl
Reference Type
Com/Nav
Touch to Select
Reference Wpts
FPL
Figure 7-25 Waypoint Info - Create User Waypoint Type - Radial/Radial
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
7-18

Waypoint Location Based on Two Radials

1. From the Create User Waypoint page, touch the Position key
and then the Radial/Radial key.
2. Touch a Ref Wpt key and use the alphanumeric keypad to
select the desired identifier.
3. Touch the upper Radial key and use the numeric keypad to
select the desired value.
4. Touch the Enter key.
5. When finished with all selections, touch the Create key to
create the new waypoint.
Garmin GTN 625/635/650 Pilot's Guide
Touch to Select
Radial Values
190-01004-03 Rev. F