Changing The Number Of Copies Of A Document; Enlarging Or Reducing The Size Of A Copy - Kodak HERO 2.2 Extended User Manual

Copying
Copy Document Option
Copy Size
Plain Paper Quality
Photo Paper Quality
Brightness
Save as Defaults
5. Press .

Changing the number of copies of a document

1. Place the original document in the ADF or on the scanner glass (see
2. Press .
3. Press to select Copy Document, then press OK.
4. Press or to select a number.
5. Press to begin copying.

Enlarging or reducing the size of a copy

1. Place the original document on the scanner glass (see
2. Press .
3. Press to select Copy Document, then press OK.
4. Press to select Copy Size.
5. Press or to select an enlargement or reduction percentage.
6. Press to begin copying.
44
Settings
Same Size (default)
Fit to Page
20% to 500%
Normal (default)
Best
Draft
Auto. (default)
Normal, –3 to +3 (Normal is
default)
No / Yes
Loading originals,
www.kodak.com/go/aiosupport
Description
The copy is the same size as the
original.
The printer detects the size of the
original on the scanner glass and the
size of the paper in the paper tray and
automatically reduces or enlarges the
original so that the copy fits on the
paper.
Reduces up to 20% or enlarges up to
500% of the original size.
Good quality output; prints faster than
Best.
The highest quality, but the slowest
print speed; eliminates the banding
effect that sometimes occurs.
The fastest print speed, but the lowest
quality.
The printer detects photo paper in the
paper tray and sets Best quality
automatically.
Lightens or darkens the copy. Normal
is no change from the original; –3 is the
darkest; +3 is the lightest.
To save the settings as the new default,
press OK. With Yes selected, press
OK.
Loading originals, 29).
29).