Managing Certificates - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336Gv2 Reference Manual
2. In the Action column of the List of Users table, click Edit for the user for which you
want to modify the settings. The Edit User screen is displayed.
3. Configure the following fields:
a. Select User Type. From the drop-down list, select one of the pre-defined user types
that determines the access credentials:
• Administrator. User who has full access and the capacity to change the VPN
firewall's configuration (that is, read/write access).
• SSL VPN User. User who can only log in to the SSL VPN portal.
• IPSEC VPN User. User who can only make an IPsec VPN connection via a
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled
(see "Configuring Extended Authentication (XAUTH)"
• Guest User. User who can only view the VPN firewall's configuration (that is,
read-only access).
b. Check to Edit Password. Select this checkbox to make the password fields
accessible to modify the password. Change the password by first entering the old
password, and then entering the new password twice.
c. Idle Timeout. Change the idle logout time to the number of minutes you require.
The default is 5 minutes.
4. Click Apply to save your settings or Cancel to return to your previous settings.
Note: The password and time-out value you enter will be changed back to
password and 10 minutes, respectively, after a factory defaults
reset.

Managing Certificates

The network storage uses Digital Certificates (also known as X509 Certificates) during the
Internet Key Exchange (IKE) authentication phase to authenticate connecting VPN gateways
124 | Chapter 7: Managing Users, Authentication, and Certificates
on page 86").