Setup Menu - NETGEAR N300 User Manual

You do not need to enter a password.
• PIN Number. To use the PIN method, do the following:
a. Select the PIN Number radio button.
The screen adjusts:
b. Enter the client security PIN.
c. Click the Next button.
Within 2 minutes, go to the client and use its WPS software to let the client join the
network.
You do not need to enter a password.
While the router attempts to add the WPS-capable client, the WPS LED
the front of the router blinks green. When the router establishes a WPS
connection, the LED is solid green, and the router WPS screen displays a
confirmation message.
d. Repeat this procedure to add another WPS client to your network.

Setup Menu

Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup. This is a shortcut to the same Internet Setup screen that you can access
from the dashboard on the Basic Home screen. For information, see
page 24.
• Wireless Setup. This is a shortcut to the same Wireless Settings screen that you can
access from the dashboard on the Basic Home screen. For information, see
Wireless Settings
• Guest Network. This is a shortcut to the same Guest Network screen that you can
access from the dashboard on the Basic Home screen. For information, see
Network on page 36.
• WAN Setup. Internet (WAN) setup. For information, see
• LAN Setup. Local area network (LAN) setup. For information, see
page 46.
• QoS Setup. Quality of Service (QoS) setup. For information, see
N300 Wireless Router WNR2000v4
on page 26.
genie Advanced Home
42
Internet Setup
Basic
Guest
WAN Setup on page 43.
LAN Setup on
QoS Setup on page 51.
on
on