Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
Repeat Step 2 and Step 3 to add another WPS client to your network.
4.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
Internet Setup. Go to the same Internet Setup screen that you can access from the
•
dashboard on the Basic Home screen. See
Wireless Setup. Go to the same Wireless Settings screen that you can access from the
•
dashboard on the Basic Home screen. See
Guest Network. This selection is a shortcut to the same Guest Network screen that you
•
can access from the dashboard on the Basic Home screen. See
page 36.
WAN Setup. Internet (WAN) setup. See
•
LAN Setup. Local area network (LAN) setup. See
•
QoS Setup. Quality of Service (QoS) setup. See
•
page 42.
N600 Wireless Dual Band Gigabit Router WNDR3700v4
NETGEAR genie Advanced Home
on page 26.
Internet Setup
Basic Wireless Settings
on page 36.
WAN Setup
LAN Setup
Quality of Service (QoS) Setup
35
on the front of
on page 33.
on
Guest Networks
on page 39.
on