Set Up A Repeater - NETGEAR N300 User Manual

3. Select the Wireless Base Station radio button.
4. (Optional) Select the Disable Wireless Client Association check box to prevent wireless
clients from associating with the base station and allowing LAN client associations only. You
can leave the check box cleared if you prefer wireless clients to be able to associate with the
base stations.
5. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access
points that should function as repeaters.
If your router is the base station, it can function as the "parent" for up to 4 other access
points.
6. Click the Apply button.

Set Up a Repeater

Use a wired Ethernet connection to set up the repeater to avoid conflicts with the wireless
connection to the base station.
Note: If you set up the your router as a base station with a non-NETGEAR
access point as the repeater, you might need to change additional
configuration settings. In particular, you should disable the DHCP server
function on the access point that functions as the repeater.
N300 Wireless Router WNR2000v4
Advanced Settings
84