Bandwidth Control - NETGEAR N300 User Manual

5. Select the radio button next to the device that you want to edit or delete, and do one of the
following:
• Click the Delete button to remove the device from the table.
• Click the Edit button to edit the MAC address, device name, or priority.
Note: You cannot delete or edit a device that was detected by the router and
automatically added to the MAC Device List.
6. Click the Apply button on the QoS - Priority Rules screen.
The device information is saved or removed from the MAC Device List.

Bandwidth Control

Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the
router to the Internet.

To set the maximum uplink bandwidth:
1. Select Advanced > Setup > QoS Setup.
The QoS Setup screen displays:
2. Select the Turn Bandwidth Control On check box.
3. Select the Automatically check Internet Uplink bandwidth radio button.
4. Click the Check button.
The router detects the available uplink bandwidth. After about 1 minute, the available
bandwidth displays onscreen. This information can help you to determine the maximum
bandwidth setting that you want to allow.
5. Select the Uplink bandwidth radio button.
N300 Wireless Router WNR2000v4
genie Advanced Home
58