Within two minutes, go to the client device and use its WPS software to join the
network without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
Repeat Step 2 and Step 3 to add another WPS client to your network.
4.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
Internet Setup. This is a shortcut to the same Internet Setup screen that you can access
•
from the dashboard on the Basic Home screen. See
Wireless Setup. This is a shortcut to the same Wireless Setup screen that you can
•
access from the dashboard on the Basic Home screen. See
page 27.
Guest Network. This is a shortcut to the same Guest Network screen that you can
•
access from the dashboard on the Basic Home screen. See
WAN Setup. Internet (WAN) setup. See
•
LAN Setup. Local area network (LAN) setup. See
•
QoS Setup. Quality of Service (QoS) setup. See
•
page 44.
N600 Wireless Dual Band Router WNDR3400v3
WAN Setup
Genie Advanced Home
37
on page 23.
Internet Setup
Basic Wireless Settings
Guest Networks
on page 38.
on page 41.
LAN Setup
Quality of Service (QoS) Setup
on the top of
on
on page 31.
on