Configuring The Dns Client; Configuring Static Domain Name Resolution; Configuring Dynamic Domain Name Resolution - 3Com 4210G Series Configuration Manual

Configuring the DNS Client

Configuring Static Domain Name Resolution

Follow these steps to configure static domain name resolution:
To do...
Enter system view
Configure a mapping between a host
name and IP address in the static
name resolution table
The IP address you last assign to the host name will overwrite the previous one if there is any.
You may create up to 50 static mappings between domain names and IP addresses.

Configuring Dynamic Domain Name Resolution

Follow these steps to configure dynamic domain name resolution:
To do...
Enter system view
Enable dynamic domain name
resolution
Specify a DNS server
Configure a domain name
suffix
You may configure up to six DNS servers and ten DNS suffixes.
Use the command...
system-view
ip host hostname ip-address
Use the command...
system-view
dns resolve
dns server ip-address
dns domain domain-name
10-4
Remarks
––
Required
Not configured by
default.
Remarks
—
Required
Disabled by default.
Required
Not specified by default.
Optional
Not configured by default, that
is, only the provided domain
name is resolved.