Outputting System Information To A Monitor Terminal - 3Com 4210G Series Configuration Manual

To do...
Configure the output rules of
system information
Configure the format of the
time stamp
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:
To do...
Enable the monitoring of
system information on the
console
Enable the display of
debugging information on the
console
Enable the display of log
information on the console
Enable the display of trap
information on the console

Outputting System Information to a Monitor Terminal

System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the AUX, VTY user interface.
Outputting system information to a monitor terminal
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Use the command...
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
22-7
Remarks
Optional
Refer to Default output rules of
system information.
Optional
The time stamp format for log,
trap and debugging information
is date by default.
Remarks
Optional
Enabled on the console and
disabled on the monitor
terminal by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 22-2 for default
channel names.