Configuring The Dns Proxy; Displaying And Maintaining Dns; Dns Configuration Examples; Static Domain Name Resolution Configuration Example - 3Com 4210G Series Configuration Manual

Configuring the DNS Proxy

Follow these steps to configure the DNS proxy:
To do...
Enter system view
Enable DNS proxy

Displaying and Maintaining DNS

Display the static domain name
resolution table
Display DNS server information
Display domain name suffixes
Display the information of the dynamic
domain name cache
Clear the information of the dynamic
domain name cache

DNS Configuration Examples

Static Domain Name Resolution Configuration Example

Network requirements
Switch uses the static domain name resolution to access Host with IP address 10.1.1.2 through
domain name host.com.
Figure 10-3 Network diagram for static domain name resolution
Configuration procedure
# Configure a mapping between host name host.com and IP address 10.1.1.2.
<Sysname> system-view
[Sysname] ip host host.com 10.1.1.2
# Execute the ping host.com command to verify that the Switch can use the static domain name
resolution to get the IP address 10.1.1.2 corresponding to host.com.
[Sysname] ping host.com
PING host.com (10.1.1.2):
system-view
dns proxy enable
To do...
Use the command...
Use the command...
display ip host
display dns server [ dynamic ]
display dns domain [ dynamic ]
display dns dynamic-host
reset dns dynamic-host
10-5
Remarks
—
Required
Disabled by default.
Remarks
Available in
any view
Available in
any view
Available in
user view