Troubleshooting Ipv6 Basics Configuration - 3Com 4210G Series Configuration Manual

1 packet(s) transmitted
1 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
As shown in the output information, Host can ping Switch B and Switch A.

Troubleshooting IPv6 Basics Configuration

Symptom
The peer IPv6 address cannot be pinged.
Solution
Use the display current-configuration command in any view or the display this command in
system view to verify that IPv6 is enabled.
Use the display ipv6 interface command in any view to verify that the IPv6 address of the
interface is correct and the interface is up.
Use the debugging ipv6 packet command in user view to enable the debugging for IPv6 packets
to help locate the cause.
13-25