Applying A Qos Policy - 3Com 4500G Family Configuration Manual

To do...
Exit policy view
Apply the QoS policy

Applying a QoS Policy

For details about applying a QoS policy, see QoS Configuration in the QoS Volume.
Apply a QoS policy to an interface
By applying a QoS policy to an interface, you can regulate the traffic sent or received on the interface. A
policy can be applied to multiple interfaces, but in inbound direction of an interface, only one policy can
be applied.
Follow these steps to apply a QoS policy to an interface:
To do...
Enter system view
Enter interface
view
Enter
interface
view or port
Enter port
group view
group view
Apply a policy to the interface
or all ports in the port group
For details about the qos apply policy command, see QoS Commands in the QoS Volume.
Apply a QoS policy to a VLAN
You can apply a QoS policy to a VLAN to regulate the traffic sent or received on all ports in the VLAN.
Follow these steps to apply the QoS policy to a VLAN:
To do...
Enter system view
Apply a QoS policy to a VLAN
Use the command...
quit
See Applying a QoS Policy
Use the command...
system-view
interface interface-type
interface-number
port-group manual
port-group-name
qos apply policy policy-name
inbound
Use the command...
system-view
qos vlan-policy policy-name
vlan vlan-id-list inbound
2-3
Remarks
—
Required
Remarks
—
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Required
Remarks
—
Required