To do...
Copy an existing IPv6 ACL
to generate a new one of
the same type
The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
The destination ACL does not take the name of the source IPv6 ACL.
Displaying and Maintaining IPv6 ACLs
Display information about one or all
IPv6 ACLs
Display information about ACL uses of a
switch
Display the configuration and status on
time range
Clear statistics about a specified or all
IPv6 ACLs that are referenced by upper
layer software
IPv6 ACL Configuration Example
Network Requirements
As shown in
Figure
Configure an ACL to deny access of the R&D department to external networks.
Network Diagram
Figure 3-1 Network diagram for IPv6 ACL configuration
acl ipv6 copy { source-acl6-number | name
source-acl6-name } to { dest-acl6-number |
name dest-acl6-name }
To do...
3-1, a company interconnects its departments through the switch.
Use the command...
Use the command...
display acl ipv6 { acl6-number | all |
name acl6-name }
display acl resource
display time-range
{ time-range-name | all }
reset acl ipv6 counter
{ acl6-number | all | name
acl6-name }
3-5
Remarks
Required
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in user
view