Table of Contents
Advertisement
Auto Pan
Specifies the auto pan settings. This item sets the
.
Auto Pan operation which moves at a specific
speed from the preset [Start].
Click [Auto Pan] in the operation menu to open
0
the setting screen.
When you click the [Apply] button, the settings
0
selected for [Mode] and [Speed] become valid
on the viewer, and they are stored in the
computer.
.
Mode
Select the [Mode] of the auto pan operation.
Right:
0
Rotate the camera horizontally in the right
direction from the [Start].
Left:
0
Rotate the camera horizontally in the left
direction from the [Start].
Return:
0
Move between [Start] and [Return] in the
clockwise direction from the [Start] toward the
[Return].
You can specify any random position as the start
and return positions except under the following
conditions.
Tilt angle of 90 ° or larger
0
(An error message appears if the angle is set
to 90 ° or larger.)
Memo :
If the zoom ratio between the [Start] and [Return]
0
is different from each other, linked operations
between zoom and pan/tilt may not be even.
Speed
Select the auto pan operation speed.
[Set values: Low, Middle, High]
Start, Return
Select the [Start] and [Return] (only during "Return")
of the operation. Pan, tilt, or zoom the camera
manually, decide on a position, and click [Set] to
register.
[Set]:
0
Complete the Auto Pan settings.
[GoTo]:
0
Move to the registered position.
Memo :
For details on manual pan, tilt, and zoom
0
operations, refer to the following.
(A p.98 [ Pan / Tilt / Zoom ] )
[Control] - [PTZ Settings]
95
Advertisement
Table of Contents
