Table of Contents
Advertisement
FTP Recording
Record Status
For selecting a recording mode. Selecting "ON"
displays options after [Record Status].
[Set values: ON, ROFF]
FTP Server
For setting the IP address or FQDN of the FTP
server.
Path
For setting the path name. When [Path] is left blank,
FTP transfer will be performed to the home
directory of the FTP server.
Memo :
To enable FTP transfer to a directory below the
0
home directory, set the corresponding directory
name in [Path]. Delimit the directory using "/".
Example: subdir1/subdir2
Destination directory of FTP transfer will be
0
dependent on the FTP server if "/" is added at
the beginning.
User Name
Enter the user name.
Password
Enter a password. When a user name is specified,
"******" is displayed.
Recording Mode
For setting the FTP recording mode. Options for
[Constant] vary according to the selected
[Recording Mode].
Constant:
0
Transfers JPEG images to the FTP server
constantly at the preset time.
Alarm:
0
Transfers JPEG images before and after the
occurrence of an alarm that matches the preset
conditions to the FTP server.
Constant+Alarm:
0
Enables both Constant and Alarm recording.
[Set values: Constant, Alarm, RConstant + Alarm]
Constant
Settings for performing constant recording.
9 Encoder
For selecting the encoder for performing constant
recording.
Memo :
You can select a JPEG encoder number.
0
9 Interval
For setting the recording interval in seconds.
[Set values: R1 to 65535] seconds
9 File Naming
Three types of recording file names are available
for selection.
"Auto":
0
Generated from the year/month/day/hour/
minute/second, and number.
Example: 20121114161032-001-2.jpg
"Manual1":
0
Year, month, day, hour, minute, second, and
number are added to [User-Defined-String] in
the file name.
Example: Camera1_20121114161032001.jpg
"Manual2":
0
File name contains only the character string
entered in [User-Defined-String]
Example: Camera1.jpg
[Set values: RAuto, Manual1, Manual2]
9 Sunday to Saturday
For selecting whether to activate or stop recording
by day of the week.
[Set values: RUnmask All, Mask All, Unmask
Span, Mask Span]
For setting the time period when "Unmask
0
Span" or "Mask Span" is selected.
[Set values: 00H00M to 24H00M]
Alarm
Settings for performing alarm recording.
9 Encoder
For setting the encoder for performing alarm
recording, and the JPEG frame rate.
[Set values: 30 fps, 15 fps, 10 fps, 7.5 fps, R5 fps,
3 fps, 2 fps, 1 fps]
Memo :
You can select a JPEG encoder number.
0
The settable frame rate varies with the encoder
0
setting.
[Advanced Settings] Page -[FTP Recording] Page
61
Advertisement
Table of Contents
