Table of Contents
Advertisement
Alarm Settings
For setting the corresponding alarm trigger when
"Alarm" is selected in [Recording Mode].
9 Trigger1
For selecting the first trigger for starting alarm
recording.
[Set values: RPin Input1 Make, Pin Input1 Break,
Pin Input2 Make, Pin Input2 Break, Position, Audio
Detection1, Audio Detection2, Motion Detection,
Tampering Detection, Day/Night, Time, FAN Stop]
Memo :
The "Audio Detection1", "Audio Detection2",
0
"Motion Detection", and "Tampering Detection"
settings for the trigger specified in [Trigger1]
need to be set to "ON" on the respective settings
pages under [Advanced Settings].
If the trigger for [Trigger2] is set to "Disable",
0
alarm recording starts with only the trigger in
[Trigger1].
When "Audio Detection1", "Audio Detection2",
0
"Motion Detection", "Tampering Detection",
"Day/Night", or "Time" is selected for [Trigger1],
[Interval] and [Trigger2] cannot be selected.
9 Interval
This is available when both [Trigger1] and
[Trigger2] are set.
Specify the maximum interval between each
trigger for [Trigger1] and [Trigger2].
Starts alarm recording if [Trigger2] occurs within
the maximum time interval after [Trigger1] has
occurred.
[Set values: 1 to 3600]sec
Memo :
If an invalid value is set, a dialog box indicating
0
"Invalid interval" appears. If the interval field is
left blank, a dialog box indicating "Interval field
is blank" appears.
9 Trigger2
For selecting the second trigger for starting alarm
recording.
[Set values: RDisable, Pin Input1 Make, Pin Input1
Break, Pin Input2 Make, Pin Input2 Break]
Memo :
If the same setting is specified for [1st Trigger]
0
and [2nd Trigger], a dialog box indicating
"Duplicate setting between Trigger 1 and
Trigger 2" appears, and alarm recording will not
start.
9 Position Number
For setting the camera's preset position number.
This is enabled when "Position" is selected for the
trigger in [Trigger1].
Executes action recording upon moving to the
entered position.
[Set values: 0 to 99]
Memo :
Specify the setting for Preset Position in [PTZ
0
Settings] of Built-in Viewer.
(A p.94 [ [PTZ Settings] ] )
This position parameter is also valid during
0
manual pan/tilt/zoom (PTZ) operation or during
automatic pan/tilt/zoom (PTZ) operations such
as Auto Patrol.
9 Day/Night
This is enabled when "Day/Night" is selected for the
[Trigger1] item.
Color:
0
Executes alarm recording when the image
switches from black-and-white to color.
Black & White:
0
Executes alarm recording when the image
switches from color to black-and-white.
[Set values: Color, Black & White]
9 Time
Displayed when "Time" is selected in [Trigger1].
Executes alarm recording at the time you have
entered.
[Set values: 00H00M to 23H59M]
[Advanced Settings] Page -[microSD Card Recording] Page
65
Advertisement
Table of Contents
