Table of Contents
Advertisement
9 Status
Displays the mount status of the microSD card.
Mounted:
0
A microSD card is mounted to the camera.
Recording to or playback of data on the card can
be performed.
Unmounted:
0
A microSD card is not mounted to the camera.
Recording to and playback of data on the card
are disabled.
No card:
0
A microSD card is not inserted into the camera,
or the inserted microSD card cannot be
recognized. To enable recording to the microSD
card, insert a card that can be recognized by the
camera.
For details, refer to [Compatible microSD
Cards] p.18.
Error:
0
Recording or playback cannot be performed
due to an error in the microSD card.
microSD Card Recording
Record Status
Starts/stops recording to the microSD card.
Select "ON" and press the [OK] button to start
recording to the microSD card.
Select "OFF" and press the [OK] button to stop
recording.
[Set values: ON, ROFF]
Memo :
This option is available only when [Status] of
0
[microSD Card] is set to [Mounted].
Note :
If you want to change the time setting of the
0
camera using any of the following operations,
make sure that you stop microSD card recording
in advance. Playback may fail if the time of the
video recorded in the microSD card overlaps
with the time of the camera after changes are
made.
When the time setting is changed in "PC Time
0
to Camera" on the [Basic Setting1] page
(A p.45 [[Basic Setting1] Page] )
When the time setting is changed in "Time"
0
and "PC Time to Camera" on the [Time] page
under [Advanced Settings]
(A p.80 [[Time] Page] )
When the time setting is changed in "Time
0
Zone" on the [Time] page under [Advanced
Settings]
(A p.80 [[Time] Page] )
[Advanced Settings] Page - [microSD Card Recording] Page
64
9 Status
This is indicated as "Recording" when recording is
in progress, and as "No Recording" when recording
is stopped. When only [Alarm] is selected, the
status is indicated as "Recording" when an alarm
trigger is detected, and as "No Recording" when an
alarm trigger is not detected.
Recording Mode
For setting the mode for recording to the microSD
card.
You can select [Constant] or [Alarm].
[Set values: Constant, Alarm]
Memo :
When [Record Status] is "ON", the [Recording
0
Mode] setting cannot be changed.
To change the [Recording Mode], do so after
0
setting [Record Status] to "OFF", followed by
pressing the [OK] button to stop recording.
When [Record Status] is set to "OFF",
0
[Recording Mode] is restored to the factory
default.
9 Constant
Regardless of whether there is an alarm, recording
to the microSD card is performed at all times.
Erases the oldest record data and continues
recording when the microSD card is full.
9 Alarm
Performs recording to the microSD card when a
trigger that matches the preset conditions in [Alarm
Settings] is detected. The recording duration for an
alarm event during the occurrence of an alarm
trigger is 60 seconds after the trigger (post-trigger).
Selecting "Alarm" displays the [Alarm Settings]
item.
Memo :
If a new trigger is detected while alarm recording
0
is in progress, the recording duration will be
extended by about 60 seconds from the point of
detection.
Erases the oldest record data and continues
0
recording when the microSD card is full.
Advertisement
Table of Contents
