Cisco Asr1000-Sip40 Physical Specifications; Cisco Asr 1013 Router And Slot Numbering For Sip - Cisco ASR 1000 Series Hardware Installation Manual

Chapter 2 Overview: Cisco ASR 1000 Series Aggregation Services Routers SIPs

Cisco ASR1000-SIP40 Physical Specifications

The Cisco ASR1000-SIP40 physical specifications are shown in
Table 2-7
Description
Physical dimension (HxWxD) 1.630 inches (41.4 mm) x 16.725 inches (424.8 mm) x
Shipping weight
Operating temperature
Relative humidity
Storage temperature

Cisco ASR 1013 Router and Slot Numbering for SIP

The Cisco ASR 1013 Router supports the Cisco ASR1000-SIP40 and Cisco ASR1000-SIP10. In the
Cisco ASR 1013 Router, the Cisco ASR 1000 Series SIP supports:
•
•
•
The Cisco ASR 1013 Router uses the same SPA subslot numbering as the Cisco ASR 1006 Router and
Cisco ASR 1004 Router.
Figure 2-5
OL-14126-15
Cisco ASR1000-SIP40 Physical Specifications
Four half-height SPAs with up to 24 ports per SPA
Two full-height SPAs with up to 48 ports per SPA
Two half-height and one full-height SPA combination that does not exceed 96 ports
Cisco ASR 1013 Router SPA Interface Slot Numbering
Front of SIP, horizontal chassis slots
SPA 0
SPA 2
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
Cisco ASR 1000 Series SPA Interface Processor Overview
Specifications
14.187 inches (360.3 mm)
8.5 lb (3.9 kg)
Nominal—40.9 to 104°F (5 to 40°C)
Short Term—40.9 to 131°F (5 to 55°C)
Operating Humidity Nominal—5% to 85% noncondensing
Operating Humidity Short Term—5% to 90% noncondensing
–40F to 158F (–40°C to 70°C)
SPA 1
SPA 3
Table 2-7.
2-11