Spa Interface Processors; Sip Summary - Cisco ASR 1000 Series Hardware Installation Manual

Overview: Cisco ASR 1000 Series Aggregation
Services Routers SIPs
This chapter describes the SPA interface processors (SIPs) that are supported on the Cisco ASR 1000
Series Aggregation Services Routers and contains the following sections:
•
•
•
•

SIP Summary

Summary descriptions of the SIPs that are supported on the Cisco ASR 1000 Series Routers are shown
in
The Description column indicates the aggregate bandwidth supported by the SIP across all subslots, and
Note
not per SPA subslot.
Table 2-1 SIP Summary
SIP
Cisco ASR 1000 Series
SIP10G
Cisco ASR 1000 Series
SIP40G
1. The Cisco ASR1000-SIP40 carrier card supports four half-height SPAs, two full-height SPAs, or a combination of two half-height and one full-height
SPAs. Double-wide SPAs are not supported.
OL-14126-15
SIP Summary, page 2-1
SPA Interface Addresses on SIPs, page 2-3
Identifying Slots and Subslots for SIPs and SPAs, page 2-3
Cisco ASR 1000 Series SPA Interface Processor Overview, page 2-7
Table 2-1.
Product Number Description
ASR-1000-SIP10 10 Gbps SPA interface processor 4
ASR-1000-SIP40 40 Gbps SPA interface processor 4
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
C H A P T E R
Maximum Number
of SPAs
1
2
Minimum Cisco IOS
Release
Cisco IOS XE
Release 2.2
Cisco IOS XE
Release 3.1S
2-1