Cisco 2900 series Installation Manual page 39

Chapter 1 Overview of the Routers
Internal Slots
Integrated Service Modules, page 1-22
•
Packet Voice Data Modules, page 1-22
•
Memory, page 1-22
•
Because of physical differences with the new slots, legacy network modules and legacy Service Modules
require an adapter for installation.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260.
Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector or 2)
while the housing is open, or both. Statement 1043
See the
document for general information and single- and double-wide slot numbering.
See the
describe how to install SMs, legacy network modules, and legacy Service Modules in the router.
See the
information.
See the
describe how to install EHWICs and legacy interface cards in the router.
See the router product page at Cisco.com for a list of supported network modules and interface cards for
Note
Cisco 2900 series and Cisco 3900 series ISRs.
OL-18712-02
Overview of Cisco Network Modules and Service Modules for Cisco Access Routers
Installing Cisco Network Modules in Cisco Access Routers
Overview of Cisco Interface Cards for Cisco Access Routers
Installing Cisco Interface Cards in Cisco Access Routers
Cisco 2900 Series and 3900 Series Hardware Installation Guide
Hardware Features
document for instructions that
for general interface card
document, for instructions that
1-19