Installing The Cisco Microsoft Windows 2000 Usb Driver; Installing The Cisco Microsoft Windows Vista Usb Driver - Cisco 2900 series Installation Manual

Installing the Cisco Microsoft Windows USB Device Driver
If using 32-bit Windows XP double-click the file setup.exe from the Windows_32 folder, or if using
Step 2
64-bit Windows XP double-click the file setup(x64).exe from the Windows_64 folder.
Step 3 The Cisco Virtual Com InstallShield Wizard begins. Click Next.
The Ready to Install the Program window appears, Click Install.
Step 4
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Connect the USB cable to the PC and router USB console ports. See
Step 6
console port turns green, and within a few moments the Found New Hardware Wizard appears.
Following the instructions to complete the installation of the driver.
Step 7 The USB console is ready for use.

Installing the Cisco Microsoft Windows 2000 USB Driver

This procedure shows how to install the Microsoft Windows 2000 USB driver.
Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it.
Step 1
Double-click the file setup.exe.
Step 2
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
The Ready to Install the Program window appears, Click Install.
Step 4
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Step 6 Connect the USB cable to the PC and router USB console ports. See
console port turns green, and within a few moments a series of Found New Hardware Wizard windows
appear. Following the instructions to complete the installation of the driver.
The USB console is ready for use.
Step 7

Installing the Cisco Microsoft Windows Vista USB Driver

This procedure shows how to install the Microsoft Windows Vista USB driver.
Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it.
Step 1
If using 32-bit Windows Vista double-click the file setup.exe from the Windows_32 folder, or if using
Step 2
64-bit Windows Vista double-click the file setup(x64).exe from the Windows_64 folder.
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
The Ready to Install the Program window appears, Click Install.
Step 4
If a User Account Control warning appears, click "Allow - I trust this program..." to proceed.
Note
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Cisco 2900 and 3900 Series Hardware Installation
3-36
Chapter 3 Installing and Connecting the Router
Table 3-1. The EN LED for the USB
Table 3-1. The EN LED for the USB
OL-18712-01