Paper Information - Oce FS-520 User Manual

2
2.7

Paper information

Finisher FS-520 provides the following functions.
- Straight delivery using primary (main) tray:
Outputs sorted/grouped sets normally to the primary (main) tray.
- Straight delivery using secondary (sub) tray:
Outputs sorted/grouped sets normally to the secondary (sub) tray.
- Offset delivery:
Outputs sorted/grouped sets to the primary (main) tray, having each set
offset by approx. 30 mm upon exit.
- Staple delivery:
Staples each set with one staple at the corner or two staples along the
edge.
Punch mode is available using Finisher FS-520 with Punch kit
PK-512/PK-513 installed.
Sheet insertion is available using Finisher FS-520 with Post inserter PI-502
installed.
Paper information
Weight
Capacity
2-14
Primary (main) tray: 60 to 300 g/m
Secondary (sub) tray: 50 to 300 g/m
Staple: 60 to 209 g/m
Secondary Max. 100 sheets
(sub) tray
Primary 500 sheets (80 g/m
(main) tray 3,000 sheets (80 g/m
(normal) 8.5" e 11" w/v, 7.25" e 10.5" w/v)
1,500 sheets (80 g/m
cap, 8K w, 12" e 18" w, 11" e 17" w, 8.5" e 14" w, Wide size
(max. 320 mm e 450 mm))
Tray capacity varies depending on paper weight.
• ~80 g/m
• 81~135 g/m
• 136~209 g/m
• 210~300 g/m
Primary Max. 50 sheets (80 g/m
(main) tray 2-9 sheets stapled: 100 sets (150-417mm in length)/ 50 sets
(Staple) (others)
10-20 sheets stapled: 50 sets
21-30 sheets stapled: 30 sets
31-40 sheets stapled: 25 sets
41-50 sheets stapled: 20 sets
Paper Insert- Max. 200 sheets (50 to 200 g/m
er PI-502
Upper/Low-
er tray
Punch Kit Unlimited
PK-512/
PK-513
Precautions for installation and use
2
2
2
) (A5 w/v, B6 w, 5.5" e 8.5" w/v)
2
) (A4 w/v, B5 w/v, 16K w/v,
2
) (SRA3w, SRA4w, A3 w, B4 w, Fools-
2
: 1,500 sheets
2
: 1,000 sheets
2
: 700 sheets
2
: 500 sheets
2
) per set
2
)
2
FS-520