Finisher adjustment (FS-520) outlines
4
Finisher adjustment (FS-520) outlines
Use this function to make the following the fine adjustments on Finisher
FS-520. For details, see CS650 User manual.
!
Detail
The target adjustment items vary depending upon the configuration of
installed options.
03 Punch Adjustment/01 Vertical Position Adj.
%
Perform this adjustment for the center position of punch holes
operated by the Punch Kit PK-512/PK-513.
03 Punch Adjustment/02 Horizontal Position Adj,
%
Perform this adjustment for the position of punch holes in the feeding
direction operated by the Punch Kit PK-512/PK-513.
03 Punch Adjustment/03 Registration Adjustment
%
Perform this adjustment for the skew of the punch position made by
the Punch Kit PK-512/PK-513 in duplex copying or cover sheet feeding
using the paper inserter.
03 Punch Adjustment/04 Paper Edge Detect Sensor Adj.
%
Perform this adjustment to detect the paper edge to be used as
reference point of punching operation.
06 Paper Inserter Tray Size Adj.
%
Perform the size adjustment for the Upper tray and Lower tray of the
Paper Inserter PI-502.
07 Output Quantity Limit
%
Specify the output quantity limit of stapled sets.
08 Curl Adjustment
%
This adjustment can be used to adjust the compression fixing amount
of paper exit decurler roller if any crease appears in printed sheets
output from FS-520.
FS-520
4
4-3