Using Finisher Fs-520 Manually - Oce FS-520 User Manual

Copying operations
3.3

Using Finisher FS-520 manually

The Finisher FS-520 with Paper inserter PI-502 installed can be operated
manually, using the operation panel provided on the paper inserter.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are
described below.
- Finisher FS-520 + Paper inserter PI-502
– Staple (1 staple/2 staples)
- Finisher FS-520 + Paper inserter PI-502 + Punch kit PK-512/PK-513
– Staple (1 staple/2 staples)
– Punch
1 oblique staple
0 Paper should be placed only in the lower tray of the paper inserter. Upper
tray cannot be used.
0 Staple (1 staple/2 staples) and Punch can be used in combination.
FS-520
2 parallel staples
3
Start/Stop button
Punch
3-17