Table of Contents
Advertisement
3
5
Touch the desired punch key to select it.
6
Touch [OK].
–
To restore the previous setting, touch [Cancel].
–
To release the Punch function with the current number of punch
holes and punch position setting remained, touch [Function Off].
The Output Application Screen will be restored.
7
Touch [OK] on the Output Application Screen.
The specified output mode icon will be displayed on the Copy Screen.
Reminder
Be careful not to exceed the finisher tray capacity when selecting the
print quantity, otherwise unexpected trouble may be caused.
3-14
Copying operations
FS-520
Advertisement
Table of Contents
