Non-Sort/Collate/Uncollate Output To The Primary (Main) Tray - Oce FS-520 User Manual

Copying operations
3.1.1 Non-sort/collate/uncollate output to the primary (main)
tray
A machine with Finisher FS-520 installed is set to collate output to the
primary (main) tray by default, regardless of whether or not to be equipped
with other optional devices.
Please select an output mode by following the procedures below.
!
Detail
You can change the initial output mode in the Utility setting. For details,
see CS650 User manual.
For detailed specifications, see "Paper information" on page 2-14 and
"Specifications" on page 2-16.
1
Position the original.
2
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
Output tray positions are indicated as square marks on the front image
of the machine, and the tray mark currently selected appears
highlighted.
If the primary (main) tray is not selected, touch [Output Tray] to select it.
3
Select the desired output mode.
– For Non-sort output, cancel both [Collate] and [Uncollate].
– For Collate output, touch [Collate] to highlight it.
– For Uncollate output, touch [Uncollate] to highlight it.
– Select output face (Face Down/Face Up), and output order
(1 to N/N to 1) as needed.
FS-520
3
3-5