DURKOPP ADLER 745-34 Speedpocket User Manual page 25

Error/ Info
9730
9800
9900
9901
9902
reF
Current seam length flashes
Meaning
Corner knife at the seam beginning
cannot be driven to
Hardware error DC motor control
Defective machine parameters
(check sum error)
Defective pocket sequences (check
sum error)
Defective pocket programs (check
sum error)
Request to carry out the reference
run after switching the machine on
Corner knife for seam beginning
cannot be reached
Remedy
Alter L1 (adjust corner knife distance) or
change positioning point of the current
seam
Check DC motor, DC controller and cable;
check voltage supply
Initialize machine parameters anew (test
program); Set machine parameters
Initialize pocket sequences anew (test
program);
Set pocket sequences
Initialize defective pocket programs (test
program);
Set pocket programs
Step back on the pedal
Change the present seam length, or
change the loading position, or change L1
(adjust distance counter knife).
23