Dongle Menu - DURKOPP ADLER 745-34 Speedpocket User Manual

3.5 Dongle Menu

3 0 5
d o
Data dongle, e.g. for Cl. 745-34S
d 7 4 5 - 3 4 S
Boot dongle, e.g. for Cl. 745-34S
b 7 4 5 - 3 4 S
Empty Dongle (not formatted)
I n f o 4 3 0 2
d o L P P P
I n F o 4 3 2 3
Important:
To save the parameters you will need an empty dongle. It can be
bought at the sales point of Dürkopp Adler AG under the following part
number 9835 901005.
After actuating the "OK" key, the display display changes to a lower
level. Using the key "¬" will bring it back, one level higher. For other
choices within the menu use the "­" and "¯" keys.
At the same time, the right half of the display flashes.
If no dongle is connected at the plug connection "X110", the message
"Info 4301" will be displayed. The left and right half of each menu item
will flash during the data transmission.
Menu item display dongle content
d i r
The following displays may appear after actuating the "OK" key
(to save the parameters)
(The dongle has to be formatted first, check menu item format dongle).
Exit and go back to the Menu item display dongle content by
actuating the "OK" key.
Menu item load the machine parameter
Confirmation
After actuating the "OK" key, the machine parameter will be loaded
from the dongle to the control.
Exit and go back to the Menu item load the machine parameter by
actuating the "ESC" key.
If the dongle contains no machine parameter, the message "Info 4325"
displays, it has to be confirmed by actuating the "OK" key.
9