Table of Contents
Advertisement
1.
Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Al-
ways wear ANSI approved ear protection when operating or working around the
Generator when it is running.
1.
All connections and conduits from the Generator to the load must only be in-
stalled by trained and licensed electricians, and in compliance with all relevant
local, state, and federal electrical codes and standards, and other regulations
where applicable.
2.
The Generator must be earth-grounded in accordance with all relevant electrical
codes and standards before operation.
3.
If an extension cord (not included) is used, make sure to use only UL
cords having the correct gauge and length. (See Figure A.)
REQUIRED MINIMUM EXTENSION CORD GAUGE – 120 VOLT
NAMEPLATE
AMPERES
(At Full Load)
0 - 25 Feet
0 - 5
5.1 - 8
8.1 - 12
12.1 - 15
15.1 - 20
4.
Do not attempt to connect or disconnect load connections while standing in wa-
ter, or on wet or soggy ground.
5.
Do not touch electrically energized parts of the Generator and interconnecting
cables or conductors with any part of the body, or with any non-insulated conduc-
tive object.
6.
Connect the generator only to a load or electrical system (115 volt) that is com-
patible with the electrical characteristics and rated capacities of the Generator.
7.
Before servicing equipment powered by the Generator, disconnect the equipment
from its power input.
For technical questions, please call 1-800-444-3353.
SKU 92456
NOISE PRECAUTIONS
ELECTRICAL PRECAUTIONS
EXTENSION CORD LENGTH
25 - 50 Feet
16
16
16
16
14
14
12
12
10
10
FIGURE A
50 -100 Feet
100 – 150 Feet
16
14
12
10
10
®
listed
150– 200 Feet
12
12
10
-
-
-
-
-
-
-
Page 9
Advertisement
Table of Contents
