Chicago Electric 92456 Operating Instructions Manual page 13

3. Before the first use, remove the Fuel Tank Cap (33) and fill the Fuel Tank (30B)
with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the
Engine's Fuel Gauge (34) for the amount of unleaded gasoline in the Fuel Tank.
If necessary, refill the Fuel Tank with unleaded gasoline. (See Figure C.)
To Start The Engine:
Make sure the electrical powered tools/equipment that will be used is not
1.
plugged in to the Generator.
Turn the 115 volt AC Circuit Breaker (5) to its "ON" position. (See Figure D.)
2.
CIRCUIT bREAKER
(5)
FIGURE D
CLOSED
CHOKE LEVER
(21A)
FUEL VALVE (40b)
3. Turn on the Fuel Valve (40B). (See Figure E.)
4. Close the Choke Lever (21A) to about 1/8" clearance. (See Figure E.)
For technical questions, please call 1-800-444-3353.
SKU 92456
ON
OFF
OPEN
OFF
ON
FIGURE E
REV 03/06
Page 13