Configuring Tray Settings - Xerox Phaser 3610 User Manual

Configuring Tray Settings

Use this menu to configure the paper trays for the paper size and type, set custom sizes, and turn the
display prompts on and off.
To configure the tray settings:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
In CentreWare Internet Services, click Properties.
2.
3. To expand the menu, in the Properties pane, next to the General Setup folder, click the plus symbol
(+).
4. From the General Setup menu, click Tray Settings.
5. To use the panel or print driver settings to select the Bypass Tray mode, under Tray Settings select
Bypass Tray Mode.
6. Under Tray Settings, next to each tray selection, select the paper size and paper type from the lists.
7. Under Tray Settings, enter the custom paper sizes for the paper width (X) and the paper length (Y).
8. To have the display prompt you for the paper settings each time the paper tray is loaded, next to
the corresponding tray, select On.
9. Under Tray Priority, select the tray priority for paper usage.
10. Click Save Changes.
® ®
Xerox Phaser 3610 Black and White Printer
Installation and Setup
37
User Guide