Printer Resets Or Turns Off Frequently; Condensation Has Formed Inside The Printer - Xerox Phaser 3610 User Manual

Troubleshooting

Printer Resets or Turns Off Frequently

Probable Causes
The power cord is not plugged into the outlet
correctly.
A system error occurred.
The printer is connected to an uninterruptible
power supply.
The printer is connected to a power strip
shared with other high-power devices.

Condensation Has Formed Inside the Printer

Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is
located in a warm room. Condensation can form in a printer after it has been sitting in a cold room that
is heated quickly.
Probable Causes
The printer has been sitting in a cold room.
The relative humidity of the room is too high. • Reduce the humidity in the room.
® ®
104 Xerox Phaser 3610 Black and White Printer
User Guide
Solutions
Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer.
Turn off the printer, then turn it on again. Print the Error History
report from the Information Pages menu. If the error persists,
contact your Xerox representative.
Turn off the printer, then connect the power cord to a suitable
outlet.
Plug the printer directly into the outlet or into a power strip that is
not shared with other high-power devices.
Solutions
• Allow the printer to acclimate for several hours before operation.
• Allow the printer to operate for several hours at room
temperature.
• Move the printer to a location where the temperature and
relative humidity are within the operating specifications.